WLED pixel controller up to 10 strip ports. Screw terminals bring out all GPIO pins of ESP32

Customer service email: wled@wled.cc

WLED program is an open-source yet fast and feature-rich implementation of an ESP32 webserver to control smart LED Pixels by Aircoookie. See https://kno.wled.ge/

This WLED controller is pre-installed the WLED program already.

Power on and use a WiFi device to connect to the access point WLED-AP with the default password wled1234.  Go to the IP 4.3.2.1 in your browser to control your lights! 

Aircoookie runs a website https://kno.wled.ge/ for WLED project. And you can check out the WLED forum! https://wled.discourse.group/

Specifications-

• Size: 170x90x40cm
• CPU: ESP32-WROOM-32E(4MB Flash + 2MB PSRAM )
• ESP32-WROOM-32E datasheet : https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32e_esp32-wroom-32ue_datasheet_en.pdf
• DC power input 5-24V = Output voltage ((All pixel output ports’ + & - terminals are connected internally to power input terminals. So + & - terminals at the pixel output ports are power outports as well as power injection ports)
• WLED pixel controller up to 10 strip ports. Screw terminals bring out all GPIO pins of ESP32.  (GPIO25, GPIO26, GPIO27, GPIO32 are perfect for audio module connection, such as the I2S INMP441 module)
• Button 0 customizable pushbutton connected to GPIO33.

           Note: Besides injecting power directly from the controller's power input terminals, you may need to add separate power injection for your large number LED pixels.

Manual Instruction Download Link

 You can palce order offline by sending email to wled@wled.cc